Introduction of PNTC62 series
PNTC62 within the series of energy-saving window system is open introversion Division I refer to the European advanced technology and design concept, based on high-grade energy-saving inner casement window system for Chinese market demand and development, mainly for high-rise buildings or in high-end residential. Its excellent safety properties, physical properties, thermal insulation properties and humane manner has been widely recognized open market, window type is one of the majority of users favorite.
The system can be controlled in flat opening and introversion opening ways, it can easily meet with wisdom and effective way to open the room. When do you want to clean the glass on the outside of the sash or need a larger ventilation, the sash can be opened; when there is only a certain indoor air flow can make the sash in a “state of introversion.”
The system has a cross-sectional structure of scientific and rational, standardized supporting hardware accessories, mature and standardized processing and construction technology, can guarantee a good quality and the performance of the product.
Product Features
1. Insulation properties: insulating glass as standard configuration (6 + 12A + 6Low-E), the overall thermal performance of up to six, namely 2.5> K≥2.0W / ( m2K), In accordance with demand by adjusting the configuration of up to 6 level and above.
2. Wind pressure: rigid design to meet different load requirements. Wind pressure resistance up to nine (P≥5.0KPa).
3. Wasserdichte Leistung: scientific principle of water and other pressure chamber, combining guidance. Watertight performance of up to level 5 (500≤ △ P <700Pa).
4. Airtight performance: reasonable structure design and quality materials to ensure the sealing integrity of the seal, airtight performance of up to eight (seam length grading index value q1≤0.5m3 / (mh) units, or unit area rating, index value q2≤1.5m3 / (mh)).
5. Insulation performance: up to level 3 c.
6. Hardware accessories: standard European standard hardware slot, supporting with many brands of hardware.
7. Profile: profiles of all the main force bar design wall thickness of 2.0mm.